In this write-up we go over the simple installation process of adding a locking gas cap to your 94-09 Ford Mustang. Protect your car from gas thieves and pranksters with this simple, inexpensive modification from StangMods.com

Tools Required:

• Needle Nose Pliers

First we remove the OEM gas cap. It is held onto the fuel door with a push pin. Take your needle nose pliers and gently pull out the push pin as shown below.

 Once you have it freed, simply unscrew the stock gas cap as you normally would.

The new gas cap is attached to the fuel door in the same manner as the OEM one. Simply take the push pin and use your finger to re-insert it into the hole on the fuel door.

Once the push pin is in, put the gas cap on and turn it clockwise until you hear it lock and your done!

Its a good idea to keep one key inside your car so you'll be able to unlock the cap when you get to the gas station.